In my walkthrough for Machinika: Atlas you’ll find all the answers you need and all the solutions to every puzzle in the game.
Prepare to embark on a cosmic odyssey filled with mystery, cryptic puzzles, and a narrative that keeps you on the edge of discovery.
Explore the unknown depths of Machinika: Atlas, where every answer unveils a new enigma, and follow these walkthroughs for each chapter.
Machinika: Atlas Walkthrough Chapter 1 – New Horizons
Follow the instructions of the tutorial to learn how to move around and interact. To open the sphere you need to take the key and remake the tip to fit the new hole (an X shape) and now you can start with the first chapter.
Look around and take the metal stick. Go to the control panel in the middle and look on both side. One of the sides is dirty and you need to clean it with the air duster.
Move the metal part down, then the little metal nub to the right. With the new item that reveals you need to pull both half circles to the middle to open the box.
Now go to the other side and pull on the metal parts to open it. Rotate the top circle to align with the light and take the energy rod.
Now rotate the top circle again to face down, move the metal nub from the bottom circle to the top one and rotate the circle down to align with the light. Take the strange disc.
Read the letter on the control panel and then go to the light on the side that makes sparks. Use the metal stick to open it and take the round box.
Take a closer look at the box and rotate the lid to open it and take the crystal. Use it on the open side of the control panel and arrange the 6 metal pieces to match the burned marks on the lid:
- one middle line
- 2 lines top
- one middle line
- 2 lines, top+bottom
- 2 lines top
- 2 lines bottom
Now rotate the top of the control panel and find a secret door in the ground after you tap the screen. Tap on the left gears first, then right gears, left, left, right, to open it.
Use the air duster to clean the inside, take the broken energy road and put the good one inside. Then solve the puzzle by rotating the yellow pieces and pull them around.
Connect the lines so that the energy flows and powers up the machine.
Now you can make the new maze on the control panel.
As you are taken to the new door, look at its lock and use the strange disc and rotate it to match the lights behind. Use the key, with the right shape (square) to open the door and move through the tunnel and complete this chapter.
Machinika: Atlas Walkthrough Chapter 2 – First Contact
Push the green button and open the door to go through, then the second door, and along the next corridor to the first control panel on the right.
Pull the brown lock down to open the lid. The next control panel has an engraved plaque of the clue you need to open the first one. Push the right shapes to make the same pattern.
Go to the new stairs that open up and use your screwdriver to fix the screw and reshape the head using the buttons to make the same pattern the screw has. Now the stairs are not blocked anymore and you can go up and open the door.
Go to the desk-like panel and use the air duster to clean the right side. Rotate the round top piece to get to the button underneath and pull on the lever that gets out.
On the left side of the desk (looks like a pipe organ now) there’s a button you can push and you need to pull the pieces so that the empty space aligns with the red band behind it.
Now pull that up and get the lightbulb. Go push the same button on the right side, and align the pieces to be able to move the red strip here as well.
It’s going to be a bit harder, but after you succeed in pulling the red strip all the way out to the left, you’ll find another lightbulb.
Go to the globe behind you and use the screwdriver to open the screw that locks it. Remake the same pattern by moving the buttons on the screwdriver.
Pull up the opened screw to open the semi-sphere and solve the puzzle on the red panel by moving each symbol in its place along the lines.
Put your walkie-talkie here to get a better signal. Slide the top band left and right and the right nub up and down, until you manage to make the circle follow the same wave pattern each time.
Go back to the panel you left from and put your walkie-talkie here. Put the 2 lightbulbs next to the others and now push each bulb so that the light matches the pattern on the clue sheet above.
- I’ll say that looks like a clock, but the 12 and 6 are not lightbulbs but. Press them like this: 2 o’clock – 5 o’clock – 8 o’clock – 9 o’clock
Pick up the key from the floor. Get a closer look at it and fix it, then rotate the nub to make the lights go on. Now you can put it back to the pipe organ looking machine.
Follow the maze of the pipes and notice the dots on them. You need to press the keys so they play those notes in the right order from 1 to 4: 2-5-7-1
Take back your walkie-talkie, go to the capsule behind, and put it here. Pull on the lever to go up and take a closer look at the screen that is right in front of you now.
Move the lens around by rotating the left wheel, and move it up and down with the lever on the right. Find the three marked antennas on the green screen in the bottom right: one at 9 o’clock, another at 3 o’clock and last at 4 o’clock.
After you talk to the other here you are done with this chapter and can move to the next one.
Machinika: Atlas Walkthrough Chapter 3 – Artificial Intelligence
You need to find a way to go on the other side of the next door. Look at the panel on the left and use the screwdriver to open it. Make the same pattern from the lock by using the buttons on the screwdriver.
Move through the tunnel then when you reach the dead end, put each rectangle in its correct spot according to the colors by using the 2 circles in the middle and sliding them into the empty spots.
Now go all the way till you find another door and move the 2 red parts to the middle, rotate them, then slide them to the side. When the light turns green you can open the door and enter what looks like a meeting room.
Go to the chair in the middle and push the red button. Check out the wall behind the chairs and take the seal from it, go to the chair and look at the spot on the table in front of the chair to see the pattern.
Remake the same pattern on the seal so you can put it in the spot and match.
Take the grid to the screen that moved in front of the chair. Take a closer look at it and arrange the lines to form a continuous pattern.
Put it on the left side of the screen and press the same squares shown on the grid to reveal a semi-sphere in the middle of the table.
Go to the left, up the few stairs, and notice something on the wall with a red stamp on it. Push it to open up, move the nub from left to right on the tiny semi-sphere inside, to find a remote control with a tiny drone.
Guide the robot using the buttons on the controller to reach the target and press on the red button. Now you can take the controller.
Now go back to the table and to the panel that open up on the left side of it. Use the controller to guide the drone inside the hole through the maze: forward – left – left at the crossroad – shoot through the lasers to shut them off – reach the red target and shoot again.
The robotic arm goes back inside and you can move to the right side of the table and work on that. Pull the red button down to open it up.
Move the three circles with the red pieces so the final symbol looks like this:
To be continued…